Skladpack: our competitive advantages

2. Supply of hand tools with different types of batteries

We supply packaging hand tool, working with modern lithium-ion batteries, as well as older nickel-cadmium batteries.

The advantage of Ni-Ca batteries is their higher resistance to low temperatures, which is important in the conditions of Siberian frosts, the extreme north and other extremely low temperatures. Such a tool is irreplaceable, in particular, in felling, when you need to seal the logs with packing strap. Strapex brand STB 60 modification hand tool operates with nickel-cadmium batteries.

At the same time, lithium-ion batteries have a greater indicator of the number of cycles until discharging (800 for Li-Ion vs. 200 for Ni-Ca). And also they guarantee up to a million cycles of charging-discharging, the possibility of charging at any time and the absence of the so-called “memory effect” intrinsic for nickel-cadmium batteries and deteriorating their performance.

3. Supply of unique equipment ENDRA, which does not have world counterparts

“Skladpack” company supplies the unique Endra packaging system manufactured by Strapex, which does not have any world counterparts. Its uniqueness lies in the following:

accurate positioning of the strap;
ability to equip with three sets of heads for spikes operating simultaneously;
absence of a strapping arch;
ability to operate on the minimum sizes of strap starting from 5 mm wide and 0.35 mm thickness;
small number of moving parts (simplicity in maintenance);
two coils of strap (saving time on reloading bobbins);
possibility of adding the etiquetteer;
possibility of packing long items;
ability to pack the cable, tires, coil of pipes and other devices involving laying out of strap inside the hoop;
absence of vibro-friction soldering (wear resistance of the mechanism).

When ordering this equipment, take into the account that the tension force of the strap during the operation of the mechanism is up to 850N.

4. Supply of equipment operating in the aggressive environment

We supply ТМ Strapex equipment, which is able to operate in different aggressive environments. This equipment comes with a marking “i”, “Inox”. This type of equipment includes SMG 65i, 65iS, SMG 75i and 75iS packing machines, able to work independently (without an operator), as well as integrate into the conveyor line. The last two models have a drive conveyor.

It’s recommended for food products packaging, including sea fish, as the equipment material is not subject to corrosion at contact with salt water. The control is made in accordance with the IP 55 standard and can function with humidity of up to 85%. The presence of the letter “S” in the marking indicates the possibility of packaging of small size items from 5 x 50 mm.

5. No direct competitors in the supply of packaging hand tools

Other companies such as ZAPAK, ITATOOLS, FROMM, COLUBMIA, HELIOS, besides ТМ Strapex, are involved in manufacturing of packaging hand tools. However, the TM Strapex tool supplied by us has a number of undeniable advantages:

new engine without collector brushes, which contributes to the tension and drives the vibro friction (saving on repair);
use of BOSH Li-Ion batteries, which charge in 15-25 minutes and have battery temperature controllers (prevents overheating);
touch control panel with the possibility of blocking and selecting strapping modes, including strapping with one pressing;
ability to add the strap;
ability to operate the strap in a soft tension range;

ability to transfer the tool to Sleep mode;
ergonomics of the tool, eliminating the excess load on the operator’s wrist during horizontal packaging;
special fixtures that do not allow strap skewness and slipping out during adhesion;
possibility of attaching to an equalizer;
simplicity in replacement of parts;
possibility of installing protective devices (metal plate and silicone pads) for operating in severe conditions;
presence of a sound signal of the end of adhesion;
impact resistance of the case;
mechanical protection of the battery;
light weight of the tool.

6. Supply of arched press-free vertical packaging systems

ТМ Strapex manufactures these systems with VSM 3000 marking. Strap’s tension force in such systems amounts up to 3000N. Arched press-free packaging systems are being utilized during manufacturing of paper products (napkins, toilet paper, watman, cardboard, etc.).

7. Supply of arched horizontal packaging systems

ТМ Strapex manufactures such systems with H40U 3000 marking. Strap’s tension force in such systems amounts up to 3000N. Arched horizontal packaging systems are being utilized in the construction industry (packaging of bricks, tiles, concrete blocks, curb stones, etc.).

8. Supply of stationary systems palletizing goods without revolving platform

This system is called COBRA. The absence of a revolving platform excludes the impact of centrifugal forces on the packed goods. There is also a pre stretching option, the option for packing oversized and heavy loads (furniture and other). Working area D 2300mm, H-2900mm.

9. Supply of pneumatic tool for steel strap cutting-out

“Skladpack” company supplies combined STP 62, STP 63 pneumatic tool for cutting-out of steel strap (dovetail joints). Peculiar specifications of the model – light weight and ergonomic button layout.

10. Supply of latest generation cordless tools

The outdated Strapex STB 70 (Orgapack OR-T 250), Strapex STB 80 (Orgapack OR-T 400) models were substituted with new STB 73 (OR-T 260), STB-75 (OR-T 450) models. Their differences:

Li-ion battery – one charge 800 adhesion cycles;
the latest DC motor without brushes;
incredibly light weight of the tool;
option of packing with one press of the button;
touchscreen;
more reliable.

11. Supply of modern packaging machines

Strapex manufactures SMG series packaging machines with better specifications than those of analogs. Thus, Strapex packaging machines, in comparison with the similar Traspack equipment, have a much higher productivity, IP 55 class protection, the ability to work at low temperatures and high humidity, the option of packaging small cargo, mode programming and working without an operator. Power consumption is lower than that of the analogs.

As you can see, “Skladpack” company, indeed, has a number of significant advantages over competitors and provides you with a greater choice of options to purchase packaging equipment and tools. For all goods – manufacturer’s warranty. Qualified advice of “Skladpack” company experts is provided to every customer.